Honda SH300 2006 Manual page 438

IGNITION SYSTEM
IGNITION COIL
REMOVAL/INSTALLATION
Remove the maintenance lid (page 3-4).
Disconnect the spark plug cap.
Remove the spark plug wire clamp bolt.
Remove the wire band boss from the wire stay.
Disconnect the ignition coil wire connectors.
Remove the bolts, set plates and ignition coil.
Installation is in the reverse order of removal.
IGNITION TIMING
Start the engine and warm it up operating
temperature.
Stop the engine and remove the timing hole cap
from the right crankcase cover.
Connect the timing light to the spark plug wire.
Read the instruc-
tions for timing light
Start the engine, let it idle and check the ignition
operation.
timing.
20-8
WIRE BAND BOSS
BOLT/WIRE CLAMP
BOLTS, SET PLATES
CONNECTORS
TIMING HOLE CAP
TIMING LIGHT
SPARK PLUG CAP
IGNITION COIL