Honda SH300 2006 Manual page 207

SERVICE INFORMATION
GENERAL
• When removing/installing the engine, tape the frame around the engine beforehand for frame protection.
• A hoist or equivalent is required to support the frame when removing and installing the engine. Support the engine
using a jack or other adjustable support to ease engine mounting bolt removal.
• Do not support the engine using the engine oil filter or it will be damaged.
• The crankcase and crankshaft require engine removal for service. Other components can be serviced with the engine
installed in the frame.
SPECIFICATIONS
Engine dry weight
Engine oil capacity
Coolant capacity (radiator and engine)
TORQUE VALUES
Frame pivot nut
Engine pivot nut
Engine hanger bracket nut
Swing rod nut (Upper)
Swing rod nut (Lower)
Rear brake caliper mounting bolt
Starter motor cable terminal nut
TOOLS
Bearing remover, 20 mm
07931-MA70000
Pilot, 20 mm
07746-0040500
ITEM
After draining
After oil filter change
After disassembly
78 N·m (8.0 kgf·m, 58 lbf·ft)
78 N·m (8.0 kgf·m, 58 lbf·ft)
64 N·m (6.5 kgf·m, 47 lbf·ft)
42 N·m (4.3 kgf·m, 31 lbf·ft)
52 N·m (5.3 kgf·m, 38 lbf·ft)
30 N·m (3.1 kgf·m, 22 lbf·ft)
10 N·m (1.0 kgf·m, 7 lbf·ft)
Driver
07749-0010000
ENGINE REMOVAL/INSTALLATION
SPECIFICATIONS
41 kg (90.4 lbs)
1.2 liter (1.3 US qt, 1.1 lmp qt)
1.4 liter (1.5 US qt, 1.2 lmp qt)
1.7 liter (1.8 US qt, 1.5 lmp qt)
1.1 liter (1.2 US qt, 1.0 lmp qt)
U-nut.
U-nut.
U-nut.
U-nut.
U-nut.
Aloc bolt; replace with a new one
Attachment, 24 x 26 mm
07746-0010700
8-3