Honda SH300 2006 Manual page 387

Push the dust and piston seals in and lift them out.
Be careful not to
damage the piston
Clean the seal grooves, caliper cylinders and pis-
sliding surface.
tons with clean brake fluid.
INSPECTION
Check the caliper cylinder for scoring or other dam-
age.
Measure the caliper cylinder I.D.
SERVICE LIMITS:
Upper:
Middle:
Lower:
Check the caliper pistons for scratches, scoring or
other damage.
Measure the caliper piston O.D.
SERVICE LIMITS:
Upper:
Middle:
Lower:
25.460 mm (1.0024 in)
22.710 mm (0.8941 in)
25.460 mm (1.0024 in)
25.31 mm (0.996 in)
22.56 mm (0.888 in)
25.31 mm (0.996 in)
HYDRAULIC BRAKE
PISTON SEALS
DUST SEALS
17-29