Honda SH300 2006 Manual page 17

COOLING SYSTEM
ITEM
Water pump impeller
CYLINDER HEAD/VALVES
ITEM
Cylinder head bolt
Cam stopper plate bolt
Cam sprocket bolt
Cam chain tensioner lifter sealing
bolt
Cylinder head cover bolt
DRIVE AND DRIVEN PULLEYS/CLUTCH
ITEM
Clutch/driven pulley nut
Clutch outer nut
Drive pulley face bolt
FINAL REDUCTION
ITEM
Final reduction case bolt
ALTERNATOR/STARTER CLUTCH
ITEM
Starter clutch outer socket bolt
Flywheel bolt
CRANKCASE/CRANKSHAFT/BALANCER/PISTON
ITEM
Crank pin bearing cap nut
Cam chain tensioner pivot bolt
ELECTRIC STARTER
ITEM
Starter motor cable terminal nut
Starter motor cover bolt
Starter motor negative brush
screw
OTHERS
ITEM
Centerstand spring hook bolt
Left crankcase sealing torx bolt
Right crankcase sealing torx bolt
THREAD
Q'TY
DIA. (mm) N·m (kgf·m, lbf·ft)
1 7
THREAD
Q'TY
DIA. (mm) N·m (kgf·m, lbf·ft)
4 9
1 6
2 6
1 11
2 6
THREAD
Q'TY
DIA. (mm) N·m (kgf·m, lbf·ft)
1 30
1 12
1 10
THREAD
Q'TY
DIA. (mm) N·m (kgf·m, lbf·ft)
7 8
THREAD
Q'TY
DIA. (mm) N·m (kgf·m, lbf·ft)
6 6
1 10
THREAD
Q'TY
DIA. (mm) N·m (kgf·m, lbf·ft)
2 8
1 6
THREAD
Q'TY
DIA. (mm) N·m (kgf·m, lbf·ft)
1 6
2 5
1 5
THREAD
Q'TY
DIA. (mm) N·m (kgf·m, lbf·ft)
1 6
1 8
1 8
GENERAL INFORMATION
TORQUE
12 (1.2, 9) Left-hand threads.
TORQUE
38 (3.9, 28) Apply oil to the threads and
seating surface.
12 (1.2, 9) Apply locking agent.
16 (1.6, 12) Apply locking agent.
22 (2.2, 16)
10 (1.0, 7)
TORQUE
79 (8.1, 58)
74 (7.5, 55)
83 (8.5, 61) Apply oil to the threads and
seating surface.
UBS bolt.
TORQUE
24 (2.4, 18)
TORQUE
23 (2.3, 17) Apply locking agent.
103 (10.5, 76) Apply oil to the threads and
seating surface.
UBS bolt.
TORQUE
33 (3.4, 24) Apply oil to the threads and
seating surface.
12 (1.2, 9)
TORQUE
10 (1.0, 7)
4.9 (0.5, 3.6)
3.7 (0.4, 2.7)
TORQUE
12 (1.2, 9) Apply locking agent.
23 (2.3, 17) Apply locking agent.
23 (2.3, 17) Apply locking agent.
REMARKS
REMARKS
REMARKS
REMARKS
REMARKS
REMARKS
REMARKS
REMARKS
1-13