Honda SH300 2006 Manual page 265

Apply grease to a new needle nearing rollers.
Install the needle bearing into the driven face
squarely with the sealed side facing up so that the
depth from the driven face surface is 0.8 mm (0.03
in) using the special tool.
TOOLS:
Driver
Attachment, 32 x 35 mm
Pilot, 25 mm
INSPECTION
DRIVEN FACE SPRING
Measure the driven face spring free length.
SERVICE LIMIT: 106 mm (4.2 in)
DRIVEN FACE
Check the driven face for scratches, scoring or dam-
age.
Measure the driven face boss O.D.
SERVICE LIMIT: 39.94 mm (1.572 in)
MOVABLE DRIVEN FACE
Check the movable driven face for scratches, scor-
ing or damage.
Check the guide grooves for stepped wear or dam-
age.
Measure the movable driven face I.D.
SERVICE LIMIT: 40.06 mm (1.577 in)
DRIVE AND DRIVEN PULLEYS/CLUTCH
07749-0010000
07746-0010100
07746-0040600
ATTACHMENT/PILOT
NEEDLE BEARING
DRIVER
0.8 mm
(0.03 in)
11-15