4. Speed Sensor Line Short Circuit Inspection (at
sensor side)
Check for continuity between each terminal
(Black and White) of the sensor side 2P connec-
tor and ground in the same manner as the previ-
ous step.
Is there continuity?
YES
– Faulty front wheel speed sensor.
NO
– GO TO STEP 5.
5. Speed Sensor Line Open Circuit Inspection
Short the Pink/Black and Green/Orange wire ter-
minals of the ABS modulator 25P connector with
a jumper wire.
Check for continuity at the terminals of the wire
harness side front wheel speed sensor 2P
(Orange) connector.
Is there continuity?
YES
– GO TO STEP 6.
NO
– Open circuit in wire between the ABS
modulator and speed sensor.
6. Failure Reproduction with a New Speed Sensor
Replace the front wheel speed sensor with a new
one (page 18-23).
Connect the ABS modulator 25P connector.
Erase the problem code (page 18-9).
Test ride the scooter above 30 km/h (18 mph).
Retrieve the problem code (page 18-8).
Dose the indicator blink 11, 12, 21, 41 or 42
times?
YES
– Faulty ABS modulator.
NO
– Faulty removed wheel speed sensor.
ANTI-LOCK BRAKE SYSTEM (ABS; SH300A/AII/AIII)
Black
White
FRONT WHEEL SPEED SENSOR
2P (ORANGE) CONNECTOR
ABS INDICATOR
FRONT WHEEL SPEED SENSOR
2P (ORANGE) CONNECTOR
ABS MODULATOR
25P CONNECTOR
Green/Orange
Pink/Black
18-15