Honda SH300 2006 Manual page 344

FRONT WHEEL/SUSPENSION/STEERING
INSTALLATION
• Urea based multi-purpose grease with extreme pressure agent (example: EXCELITE EP2 manufac-
tured by KYODO YUSHI, Japan), Shell Stamina EP2 or equivalent
LOWER
OUTER RACE
LOWER
BEARING
LOWER
INNER RACE
LOWER
DUST SEAL
STEERING STEM
Apply 3 – 5 g (0.1 – 0.2 oz) of grease (page 15-30) to
each new steering bearing and fill it up. Install the
lower steering bearing onto the stem.
Apply grease to new upper dust seal lip and upper
inner race.
Insert the steering stem into the steering head pipe
Do not get grease
and install the following while holding the stem:
on the stem
threads.
– upper steering bearing
– upper inner race
– dust seal
– adjusting nut (and temporarily tighten)
15-30
UPPER DUST SEAL
STEERING STEM
DUST SEAL
UPPER BEARING
LOCK NUT
ADJUSTING
NUT
UPPER INNER RACE
UPPER BEARING
UPPER OUTER RACE
LOWER BEARING
UPPER INNER RACE