Honda SH300 2006 Manual page 253

SERVICE INFORMATION
GENERAL
• This section covers maintenance of the drive pulley, driven pulley and clutch.
• These services can be done with the engine installed in the frame.
• Avoid getting grease and oil on the drive belt and drive/driven pulley faces in order to prevent belt slippage.
• Do not apply grease to the weight rollers.
SPECIFICATIONS
Drive belt width
Movable drive face
Clutch
Driven pulley
TORQUE VALUES
Clutch/driven pulley nut
Clutch outer nut
Drive pulley face bolt
TOOLS
Universal holder
07725-0030000
Socket wrench, 39 x 41 mm
07GMA-KS40100
ITEM
Bushing I.D.
Boss O.D.
Weight roller O.D.
Clutch outer I.D.
Lining thickness
Face spring free length
Driven face boss O.D.
Movable driven face I.D.
79 N·m (8.1 kgf·m, 58 lbf·ft)
74 N·m (7.5 kgf·m, 55 lbf·ft)
83 N·m (8.5 kgf·m, 61 lbf·ft)
Flywheel holder
07725-0040001
Bearing remover set, 20 mm
07936-3710600
DRIVE AND DRIVEN PULLEYS/CLUTCH
STANDARD
26.5 (1.04)
30.024 – 30.057 (1.1820 – 1.01833)
29.995 – 30.031 (1.1809 – 1.1823)
22.92 – 23.08 (0.902 – 0.909)
135.0 – 135.2 (5.31 – 5.32)
4.0 (0.16)
109.6 (4.31)
39.965 – 39.985 (1.5734 – 1.5742)
40.000 – 40.025 (1.5748 – 1.5758)
Apply engine oil to the threads and seating surface.
Clutch spring compressor
07LME-GZ40201
Bearing remover handle
07936-3710100
Unit: mm (in)
SERVICE LIMIT
25.5 (1.00)
30.08 (1.184)
29.98 (1.180)
22.5 (0.89)
135.5 (5.33)
1.0 (0.04)
106 (4.2)
39.94 (1.572)
40.06 (1.577)
11-3