Honda SH300 2006 Manual page 210

ENGINE REMOVAL/INSTALLATION
Remove the starter motor mounting bolts and
release the battery negative (–) cable and frame
ground cable from the starter motor.
Remove the terminal nut and release the starter
motor cable form the starter motor.
Remove the bolt and cable clamp.
Remove the bolt and hose clamp.
Loosen the band screw and disconnect the upper
water hose.
Loosen the band screw and disconnect the lower
water hose.
Place a floor jack or other adjustable support under
the engine and support it securely.
Support the frame securely with a hoist or equiva-
lent.
Remove the bolts and shock absorbers.
8-6
BOLT/CLAMP
MOTOR CABLE
GROUND CABLE
NEGATIVE CABLE
SHOCK ABSORBERS
NUT
BOLTS
HOSE
BOLT/CLAMP
HOSE
BOLTS