Honda SH300 2006 Manual page 285

SERVICE INFORMATION
GENERAL
• This section covers the removal and installation of the flywheel, starter clutch and alternator/crankshaft position (CKP)
sensor.
• These service can be done with the engine installed in the frame.
• For alternator inspection (page 19-8).
• For CKP sensor inspection (page 20-6).
SPECIFICATIONS
Starter driven gear
Starter clutch outer I.D.
TORQUE VALUES
Starter clutch outer socket bolt
Flywheel bolt
TOOLS
Flywheel holder
07725-0040001
TROUBLESHOOTING
Engine does not turn
• Faulty starter one-way clutch
• Damage starter reduction gear
ITEM
Boss O.D.
Bushing I.D.
23 N·m (2.3 kgf·m, 17 lbf·ft)
103 N·m (10.5 kgf·m, 76 lbf·ft)
Flywheel puller
07933-KM10001
ALTERNATOR/STARTER CLUTCH
STANDARD
45.660 – 45.673 (1.7976 – 1.7981)
25.026 – 25.045 (0.9853 – 0.9860)
62.319 – 62.345 (2.4535 – 2.4545)
Apply locking agent to the threads.
Apply engine oil to the threads and seating sur-
face.
UBS bolt.
Unit: mm (in)
SERVICE LIMIT
45.615 (1.6778)
25.100 (0.9882)
62.395 (2.4565)
13-3