Honda SH300 2006 Manual page 324

FRONT WHEEL/SUSPENSION/STEERING
Apply grease to a new dust seal lips and install the
dust seals until it is flush with the hub.
Install the brake disc on the wheel hub with the
Do not get grease
marked side facing out.
on the brake disc or
Install new socket bolts and tighten them in a criss-
stopping power will
cross pattern in several steps.
be reduced.
TORQUE: 42 N·m (4.3 kgf·m, 31 lbf·ft)
Install the front pulser ring on the left wheel hub.
ABS type only.
Install and tighten new torx bolts to the specified
torque.
TORQUE: 8 N·m (0.8 kgf·m, 5.9 lbf·ft)
INSTALLATION
Install the right and left side collars.
15-10
DUST SEALS
MARK
SOCKET BOLTS
PULSER RING
COLLARS
BRAKE DISC
TORX BOLTS