Honda SH300 2006 Manual page 319

Remover weight
07741-0010201
TROUBLESHOOTING
Hard steering
• Insufficient tire pressure
• Faulty tire
• Steering stem adjusting nut too tight
• Worn or damaged steering head bearings
• Worn or damaged steering head bearing races
• Bent steering stem
Steers to one side or does not track straight
• Bent front axle
• Faulty tire
• Wheel installed incorrectly
• Worn or damaged wheel bearings
• Unbalanced fork fluid level
• Bent fork leg
• Damaged or loose steering head bearings
• Damaged frame
• Worn or damaged engine mounting bushings (page 8-4)
Front wheel wobbles
• Bent rim
• Worn or damaged wheel bearings
• Axle fastener not tightened properly
• Unbalanced tire and wheel
• Faulty tire
Wheel turns hard
• Faulty wheel bearings
• Bent axle
• Front brake drag (page 17-6)
Soft suspension
• Low tire pressure
• Weak fork spring
• Low fluid level in fork
• Incorrect fluid weight (low viscosity)
Stiff suspension
• High tire pressure
• Bent fork pipe
• Bottom case binds
• High fluid level in fork
• Incorrect fluid weight (high viscosity)
• Clogged fork fluid passage
Suspension noise
• Loose fork fasteners
• Incorrect fluid weight (low viscosity)
• Worn guide bushing or fork pipe bushing
FRONT WHEEL/SUSPENSION/STEERING
Attachment, 35 mm I.D.
07746-0030400
15-5