Honda SH300 2006 Manual page 167

Tighten the connecting hose band screw until the
clearance between the screw and band end is 7.0 ±
1.0 mm (0.28 ± 0.04 in).
Connect the throttle cable to the throttle drum and
Be careful not to
set the throttle cable onto the cable bracket, then
damage the threads
adjust the throttle grip free play (page 4-5).
of throttle cable.
Connect the sensor unit 5P (Black) connector and
IACV 4P connector.
Set the wire clamp boss from the throttle body.
Install the luggage box (page 3-5).
If the sensor unit has been removed, perform the TP
sensor reset procedure (page 6-58).
FUEL SYSTEM (PGM-FI)
7.0 ± 1.0 mm
(0.28 ± 0.04 in)
CONNECTING HOSE
BAND SCREW
LOCK NUTS
THROTTLE CABLES
IACV 4P CONNECTOR
WIRE CLAMP BOSS
SENSOR UNIT 5P
(BLACK) CONNECTOR
6-57