Removal Of The Rear Cover - Barco DP2K-12C Service Manual

5. Removal and installation of projector covers
5.5

Removal of the rear cover

W
ARNING
Necessary tools
Flat screwdriver.
How to remove the rear cover from the projector?
1. Release the two captive screws at the bottom corners of the rear cover, using a flat screw driver.
Image 5-9
Release rear cover
2. Remove the rear cover of the projector doing the following:
a) gently pull out the top corners of the rear cover,
b) then move the rear cover away from the projector.
A
A
Image 5-10
Remove rear cover
82
:
This procedure may only be performed by qualified technical service personnel.
B
R5905043 DP2K-12C/11CX 19/02/2018