Table of Contents
Advertisement
6.2 Removal of the rear cover
If the rear cover is the only cover you need to remove (e.g. when checking / replacing the filter),
there is no need to turn off the projector.
Required tools
Allen wrench 4 mm
How to remove
1.
Unlock the safety bracket on the side of the projector. Use a 4 mm Allen wrench to remove the hex screw
locking the bracket (reference 1).
Image 6–3
2.
Rotate and move the bracket to a position it won't hinder you while removing the rear cover.
3.
Slide the rear cover towards the bar of the frame (reference 2) as much as possible.
Note: The handles do not click open. They are fixed into the cover.
Image 6–4 Sliding the front cover towards the frame bar and removing it.
4.
Tilt the rear cover a bit and remove it (reference 3).
1
Projector covers
R5914477 /00
XDM
83
Advertisement
Table of Contents
