12. Card Cage
12.13 Replacement of the Keypad assembly (second generation Keypad)
How to replace the Keypad assembly?
1. Remove the 4 lock nuts (reference 1, image 12-35) from the Keypad assembly mounting bolts.
2. Remove the Keypad assembly (reference 2, image 12-35).
Tip:
Make sure the four washers (reference 3, image 12-35) don't drop off the keypad assembly mounting bolts.
3. Install the new Keypad assembly (reference 2, image 12-35).
4. Tighten the 4 lock nuts (reference 1, image 12-35) on the Keypad assembly mounting bolts.
2
1
Image 12-35
230
3
R5905043 DP2K-12C/11CX 19/02/2018