Barco DP2K-12C Service Manual page 236

12. Card Cage
Removing the signal backplane
1. Remove the first intermediary plate as follow:
a) Unplug the fan connection from the signal backplane (1).
b) Turn out both fixation screws (2).
c) Slide out the plate (3).
1
Image 12-37
Intermediary plate
2. To remove the next plate (5), turn out both fixation screws (4) and slide out the plate.
Repeat in the same way for the next plate (7).
3. Unplug all cables from the signal backplane. Those inside the card cage and those next to the fans accessible via the front side.
Image 12-38
Backplane connections
4. From inside the card cage, remove the screws 1 to 6
232
2
4
6
3
5
7
R5905043 DP2K-12C/11CX 19/02/2018