12.11 Replacement of the Button module (first generation Keypad)
This procedure assumes that the Button assembly is already removed from the Card Cage.
Necessary tools
5.5 mm nut driver
How to replace the Button module?
1. Disconnect the flat cable (reference 1, image 12-17) from the Button module (reference 2, image 12-17) by performing the fol-
lowing procedure:
a) Pull out the locks at both sides of the socket (step 2, image 12-18).
b) Pull out the flat cable from the socket (step 3, image 12-18).
1
Image 12-17
1
Image 12-18
2. Remove the 4 lock nuts (reference 3, image 12-19) from the Button module mounting bolts.
R5905043 DP2K-12C/11CX 19/02/2018
2
2
12. Card Cage
3
223