Installing The Touch Panel Interface - Barco DP2K-12C Service Manual

14. Communicator touch panel

14.2 Installing the touch panel interface

Necessary tools
• 17 mm wrench.
• 10 mm wrench.
How to install the touch panel interface upon the DP2K-12C/11CX?
1. Assemble the mounting plate and the swivel arm together as illustrated. First place the nut (N) upon the rod of the mounting
plate, then add the lock washer (L), then fasten the mounting plate and the swivel arm together. When the arm is mounted, turn
nut (N) against the arm to secure the position.
Image 14-3
Assemble swivel arm
2. Slide a washer (M) over the base of the swivel arm and Insert the base of the swivel arm into the mounting hole at the top of the
DP2K-12C/11CXas illustrated.
Image 14-4
Mount swivel arm
3. Place the touch panel interface upon the mounting plate of the swivel arm and fasten the two wing nuts (W) as illustrated.
264
N
L
M
R5905043 DP2K-12C/11CX 19/02/2018