Removal Of The Rear Cover - Barco DP2K SLP Series User And Installation Manual

15.2 Removal of the rear cover

W
ARNING
cedure.
Necessary tools
Flat screwdriver 7 mm
How to remove the rear cover?
1. Loosen the four captive screws (reference 1 image 15-2) of the rear cover using a 7 mm flat screwdriver.
2. Remove the rear cover from the projector.
Image 15-2
R5906847 DP2K SLP SERIES 02/06/2017
:
Switch off the projector prior to start with this procedure, unless otherwise specified in the pro-
15. Removal and installation of the projector covers
1
133