Barco DP2K-12C Service Manual page 261

The necessary information is gathered.
The current installed version is shown next to the package version (13).
Image 13-10
Load and install software
7. Select the way the wizard will update the package. Check the desired radio button (14).
8. If automatically is selected the wizard will load the software in the oldest slot and install the software immediately (15).
If custom update (for advanced users) is selected, the wizard displays the selection for slot A or slot B (16). Check the radio
button of your choice and press Next (17).
The software will be loaded to the selected slot and will be installed immediately
When the update is finished, an status window is displayed.
R5905043 DP2K-12C/11CX 19/02/2018
13. Software update via Communicator (DC update companion)
257