8. Light processor assembly
8.10 Mount light processor assembly into the flight case
Only for a light processor assembly in a flight case.
Necessary tools
Flat screwdriver 8 x 150 mm or 10 mm nut driver.
How to mount
1. Take the assembly by both handles (1 & 2) and place the assembly on the springy plate.
H
Image 8-15
Mount assembly in flight case
2. Slide the assembly on its position so that the positioning pins (P) of the assembly match into the positioning holes (H).
3. Secure by fastening both captive screws.
148
2
P
1
A
B
R5905043 DP2K-12C/11CX 19/02/2018