Diagnostic Leds On The Smps - Barco DP2K-12C Service Manual

16. Switched mode power supply

16.1 Diagnostic LEDs on the SMPS

Diagnostic LEDs
Not that the projector input cover must be removed to see the LEDs.
+12V Indicates that the supply voltage of +12 volt is present for the electronics.
+ VTEC Indicates that the voltage to drive the Peltier elements (TEC), which are mounted on the Light Processor unit, is present
+24V Indicates that the supply voltage +24 volt is present.
280 R5905043 DP2K-12C/11CX 19/02/2018