Barco DP2K-12C Service Manual page 229

7
Image 12-22
6. Connect the flat cable to the Button module by performing the following procedure:
a) Make sure the locks at both sides of the socket are pulled out (step 1, image 12-23).
b) Insert the flat cable into the socket (step 2, image 12-23).
c) Lock the flat cable by pushing in the locks at both sides of the socket (step 3, image 12-23).
1
Image 12-23
R5905043 DP2K-12C/11CX 19/02/2018
2
12. Card Cage
3
225