Installation Of The Lps Module - Barco DP2K-12C Service Manual

18. Lamp power supply (single module)

18.3 Installation of the LPS module

Necessary tools
• Flat screw driver.
• Torque wrench with a 10 mm hexagon socket.
How to install
1. Before inserting the LPS unit, place the positioning pin at the backside to the right.
Image 18-5
Positioning pin
To move the pin to the right, pull on the pin and slide it to the right.
2. Slide a single LPS units n the compartment at the left side.
Image 18-6
Insert LPS unit
3. Slide the fixation frame on the front of the LPS unit in such a way that the fixation pins match the fixation holes.
296 R5905043 DP2K-12C/11CX 19/02/2018