Barco DP2K-12C Service Manual page 42

4. Troubleshooting
1
3
Image 4-17
Lamp house switch
Code 5191: "prism switch - warning (lens probably touches prism)" (Warning)
Situation
Lens is touching the sensor
(reference PR of image 4-18) on the
prism. Maximum lens shift position
reached.
Defect prism sensor.
PR
Image 4-18
PR Prism switch.
Code 5230: "lens zoom position - requested target not reached" (Warning)
Situation
Manual lens installed.
38
1
1
Solution
Shift the lens upwards and/or to the left.
Remove lens and reboot projector, if warning appears again then the prism sensor is
defective and needs to be replaced.
Solution
Replace the manual lens with a motorized lens.
2
R5905043 DP2K-12C/11CX 19/02/2018