Preparing The New Light Processor Assembly - Barco DP2K-12C Service Manual

8. Light processor assembly
8.6

Preparing the new light processor assembly

Only for a light processor assembly in a flight case.
Necessary tools
Flat screwdriver 8 x 150 mm or 10 mm nut driver
How to remove from the flight case
1. Open all flight case locks and open the flight case.
2. Release the two captive screws at the base of the light processor (1 and 2). Use a 6 mm flat screw driver or a 10 mm nut driver.
1
Image 8-8
Light processor assembly fixations
3. Take the light processor assembly by its handles (1 and 2) and slide it forward until the positioning pins are free (A). Than lift it
up to remove it from the flight case (B).
142
2
R5905043 DP2K-12C/11CX 19/02/2018