Barco DP2K-12C Service Manual page 228

12. Card Cage
Image 12-19
3. Remove the Button module (reference 4, image 12-20).
Tip: Make sure the 4 washers (reference 5, image 12-20) don't drop off the Button module mounting bolts.
Image 12-20
4. Install the new Button module (reference 6, image 12-21).
6
Image 12-21
5. Tighten the 4 lock nuts (reference 7, image 12-22) on the Button module mounting bolts.
224
3
4
5
R5905043 DP2K-12C/11CX 19/02/2018