12. Card Cage
12.1 Fan controller board
Functionalities
Image 12-1
Fan controller board
•
Monitors and controls all fans.
•
Monitors and controls all voltages provided by the SMPS board.
•
Monitors all temperature sensors.
•
Controls and monitors the Peltier's on rear of the DMDs.
•
Controls the front active cooling.
•
Monitors pump speed.
•
LEDs on front plate can be used to monitor the output voltages of the SMPS board.
•
Drives the dowser (shutter).
•
Contains all hardware protections for the projector.
•
Controls error line to the LPS and will shut down lamp accordingly.
Conditions included on this board :
•
DMD over temperature
•
Lamp over temperature
•
Lamp cooling down
•
Lamp house not connected
•
Light processor not connected
•
Ambient temperature below 10°.C
208
R5905043 DP2K-12C/11CX 19/02/2018