20. Fan replacement procedure
20.5 Lamp anode fan
To access the anode fan, the light processor has to be removed. This procedure assumes that the light pro-
cessor is already removed.
Necessary tools
•
2,5 mm Allen wrench.
•
3 mm Allen wrench.
•
5 mm Allen wrench.
•
Pair of pliers.
•
Universal pliers.
•
7 mm open-end wrench.
How to replace
1. Disconnect the anode fan (reference 1).
Image 20-20
Anode fan connection
2. Remove the anode fan security guard and fan bezel by releasing the four hexagon socket head cap screws (reference 1). Use
a 3 mm Allen wrench.
Image 20-21
Remove fan security guard
3. Release the three indicated hexagon socket head cap screws (reference 2) and slide out the anode fan assembly. Use a 5 mm
Allen wrench.
324
1
1
R5905043 DP2K-12C/11CX 19/02/2018