Link Decryptor Software Update - Barco DP2K-12C Service Manual

13. Software update via Communicator (DC update companion)

13.4 Link decryptor software update

How to update
1. Launch the DC Update Companion as described in "Software upgrade, launch DC update companion", page 248.
2. Select package type. Click on the drop down box (1) and select Enigma Link Decryptor Package .
Image 13-11
3. Browse the package file name. Click on Browse (2) to open the Browser window (3).
The correct file type is already filled out (4).
4. Browse for the desired file (5), select the file and click on Open (6).
Note: File has extension pkg.
The Package file name line is filled out (7).
5. Enter the device IP address (10) or click on Browse to open a device selection window (11).
Note: The IP of the connected projector is already filled out. When using the DC Update Companion as stand alone program,
then this field is blank.
258 R5905043 DP2K-12C/11CX 19/02/2018