Barco DP2K-12C Service Manual page 191

1
3
Image 11-12
Electrical connections, image view
2. Unplug the connector of the top motor (image indication 2) (brown and red wires).
3. Unplug the connector of the side motor (image indication 3) (yellow and orange wires).
4. Disconnect all connectors of the wire set (4x 2 pins connectors and 2x 6 pins connectors) (image indication 4).
If necessary, cut the wire ties.
Remove lens holder
1. Remove the 4 hexagon socket heat screws (1 to 4).
R5905043 DP2K-12C/11CX 19/02/2018
2
4
11. Lenses and Lens holder
187