3.2
Lamp change maintenance actions
Maintenance actions at every lamp change
The maintenance actions, listed below, which are required at every lamp change may be performed by a trained
projectionist who is familiar with potential hazards associated with the xenon bulb lamp.
No.
Maintenance action
1
Check the UV blocker of the lamp house for dust.
2
Check the reflector of the lamp house for dust.
3
Visual inspection of the lamp anode and cathode connectors of the lamp house. Replace the lamp house in case
4
Visual inspection of the lamp anode and cathode cables of the lamp house.
R5905043 DP2K-12C/11CX 19/02/2018
3. Preventative maintenance actions
Remarks
Only clean the UV blocker in case dust
is clearly visible upon the surface of the
UV blocker (both sides). See "Cleaning
the UV blocker of the Lamp House",
page 122.
Only clean the reflector in case dust
is clearly visible upon the surface of
the reflector. Take the lamp house to
another room and use compressed air
to blow away the dust. See "Cleaning
the UV blocker of the Lamp House",
page 122.
of degradation, damage, etc. See
"Removal of the lamp house", page 96.
Replace the lamp house in case
of degradation, damage, etc. See
"Removal of the lamp house", page 96.
21