11. Lenses and Lens holder
Image 11-40
7. Use a 13 mm nut driver to fasten the four big nuts (reference 2 image 11-37). Fasten the big nuts crosswise bit by bit. Ensure
that the upper two rods and the lower left rod contain a big spring.
Proceed with reinstalling the Lens Holder. See procedure "Install the lens holder", page 189.
The Lens Holder has to be adjusted after installation. See procedure "Scheimpflug adjustment", page 192.
206
R5905043 DP2K-12C/11CX 19/02/2018