Cold Mirror Fan - Barco DP2K-12C Service Manual

20.6 Cold mirror fan

Preparations
1. Remove the covers to get access to the cold mirror fan.
2. Remove the cover plat of the sealed compartment.
How to replace
1. Remove the cover of the Start Pulse Generator as illustrated. This cover is secured with 5 hexagon socket head cap screws.
Use a 3 mm Allen wrench.
Image 20-27
Remove SPG cover
2. Disconnect the fan wire (reference 1).
Tip: Pull out the top filter for easy access to the fan wire connection.
1
Image 20-28
Electrical disconnection
3. Turn out the 2 hexagon socket head cap screws at the right side (reference 2).
R5905043 DP2K-12C/11CX 19/02/2018
20. Fan replacement procedure
327