15.5 Closing the Mains Input compartment
Necessary tools
•
3 mm Allen wrench.
•
Flat blade screw driver.
•
Torx screw driver T20
How to close the Mains Input compartment?
1. Guide the ground wire and the two wires from the ON/OFF switch through the opening in the mounting plate of the 3-terminator
strip and secure the mounting plate with four hexagon socket head cap screws as illustrated.
Image 15-10
2. Connect the ground wire and the two wires from the ON/OFF switch with the lower pins of the 3-terminator strip. Make sure to
connect the ground wire with the marked ground pin of the 3-terminator strip.
3. Fasten the cover plate with 3 hexagon socket head cap screws and 2 Torx screws as illustrated.
R5905043 DP2K-12C/11CX 19/02/2018
15. Power input
275