Light Processor Assembly Removal - Barco DP2K-12C Service Manual

8.5

Light processor assembly removal

Necessary tools
• Flat screw driver 6 x 150 or 10 mm nut driver
• Allen wrench 4 mm
How to remove
1. Remove the lens (see user guide of the projector).
2. Release the two captive screws at the base of the light processor (1 and 2). Use a 6 mm flat screw driver on a 10 mm nut driver.
1
Image 8-6
Light processor fixations
3. Turn out the hexagon head screw at the left side of the light processor (3).
Image 8-7
Light processor removal
4. Take the light processor unit by its handles and gently pull out the light processor assembly of its compartment.
5. Place the light processor assembly on a stable table.
R5905043 DP2K-12C/11CX 19/02/2018
3
8. Light processor assembly
2
141