Barco DP2K-12C Service Manual page 338

21. Maintenance procedures
Image 21-2
Dust filter removal
Clean the dust filter
1. Remove most contamination with a vacuum cleaner in an other room or outside.
2. Blow remaining dust away with compressed air in an other room or outside.
Mount the dust filter
1. Insert the dust filter with the handle to the projector side.
2. Pull the handle a little backward, push the filter completely in. Release the handle so that it jumps in its lock.
334 R5905043 DP2K-12C/11CX 19/02/2018