Inserting A Board In The Card Cage - Barco DP2K-12C Service Manual

12. Card Cage

12.6 Inserting a board in the card cage

C
AUTION
sensitive parts.
Necessary tools
Phillips screw driver
How to insert
1. Take the board by both handles (2).
Image 12-6
Insertion of a board
2. Slide the board into both groves.
3. Push on both handles until the board is fully inserted and the connection is made with the back plane.
4. Secure the board by turning in both fixation screws (1).
When inserting a new ICP board in the card cage, the ICP software must be re-installed. See "Software update
via Communicator (DC update companion)", page 247.
214
:
Wear a wrist band which is connected to the ground while handling the electrostatic discharge
2
1
R5905043 DP2K-12C/11CX 19/02/2018