Table of Contents
Advertisement
Removal and installation of the projector covers
16.1 Removal of the front cover
Required tools
7 mm flat screwdriver
How to remove the front cover?
1.
Unscrew the six captive screws (reference 1, Image 16-1) from the front cover. Use a 7 mm flat screwdriver.
Image 16-1
2.
Remove the front cover.
16.2 Removal of the rear cover
WARNING: Switch off the projector prior to start with this procedure, unless otherwise specified in
the procedure.
Required tools
7 mm flat screwdriver.
How to remove the rear cover?
1.
Loosen the five captive screws (reference 1Image 16-2 ) of the rear cover using a 7 mm flat screwdriver.
138
R5906790 /04
Athena
1
Advertisement
Table of Contents
