Table 3-19 Dpf 10-Pin Connector And 2-Pin Connector - Horizontal Mount Atd; Table 3-20 Ddc Part Numbers For The Dpf 10-Pin And 2-Pin Connector - Horizontal - Detroit Diesel DDEC VI Application And Installation

The wiring for the DPF 10–pin connector and 2–pin connector is listed in Table 3-19.
The DDC part numbers for the DPF connector arelisted in Table 3-20.
Pin
1
2
DPF Inlet Pressure Sensor (Exhaust Gas Pressure
3
DPF Outlet Pressure Sensor (Exhaust Gas
4
Pressure After Particulate Filter)
DOC Outlet Temperature Sensor (Exhaust Gas
5
Temp in Front of Particulate Trap)
6 DOC Inlet Temperature Sensor
DPF Outlet Temperature Sensor( Exhaust Gas
7
Temp After Particulate Trap)
8
9 DOC Inlet Temperature Sensor
10
Table 3-19 DPF 10–pin Connector and 2–pin Connector — Horizontal Mount
ATD
Part
10-Pin Connector
Terminal (Male)
Plug
2-Pin Connector
Terminal (Female)
Table 3-20 DDC Part Numbers for the DPF 10-pin and 2–pin Connector —
Horizontal Mount ATD
All information subject to change without notice. (Rev. 01/07)
7SA827 0701 Copyright © 2007 DETROIT DIESEL CORPORATION
DDEC VI ELECTRONIC CONTROLS APPLICATION AND INSTALLATION
Function
Sensor Ground
Sensor Supply
Before Particulate Filter)
Sensor Ground
Sensor Ground
Connector
DPF 2–pin Connector
2
1
DDC Part Numbers
23531613
23531614
23531615
23537171
23531617
3-25