Interaction With Other Features - Detroit Diesel DDEC VI Application And Installation

FEATURES
The Cruise Control parameters are listed in Table 5-7.
Parameter
Parameter
Group
Min Cruise Set
15
Speed
Max Cruise Set
15
Speed
Increment
15 Cruise Set
Speed
Decrement
15 Cruise Set
Speed
Enable Cruise
15
Auto Resume
15 Cruise Power
Cruise Control
10
Enable Engine
Brk
Adaptive Cruise
43
Control
Table 5-7 Cruise Control Parameters
5.3.4

INTERACTION WITH OTHER FEATURES

Cruise Control will be disabled for the following:
□ Throttle Inhibit Switch is grounded
□ VSS fault is detected
□ Hard deceleration, failure of the brake switch
□ Resume/Accel and Set/Coast switches are both grounded
If LIM0 OR LIM1 are grounded and programmed for a vehicle speed limit, the "Cruise Max Set
speed" will be limited to this value.
5-14
Description
Minimum road speed
for Cruise Control
Cruise Control vehicle
set speed cannot be
faster than this value.
Set Speed
increment for every
Resume/Accel switch
momentary press.
Set Speed decrement
for every Set/Coast
switch momentary
press.
1 – Enable automatic cruise
Enables or disables
resume function after clutch
the auto resume
has been released once
feature.
2 – Enable after clutch
Enables Cruise Power
function
2 – Cruise Power Enabled
Enables or disables
1 – Enable automatic
the engine brakes
engine brake operation
during Cruise Control.
Enables/Disables the
feature.
7SA827 0701 Copyright © 2007 DETROIT DIESEL CORPORATION
Options Default
16 – 152 km/hr 32 km/hr
48–152 km/hr 152 km/hr
0–10 km/hr 1.6 km/hr
0–10 km/hr 1.6 km/hr
0 – Disable
released twice
0 – High Power
0 – High
1 – Low Power Only
0 – Disable
with Cruise Control
0 – Disable
1 – Enable
All information subject to change without notice. (Rev. 01/07)
Access
DDDL 7.0,
DRS, VEPS
DDDL 7.0,
DRS, VEPS
DDDL 7.0,
VEPS, DRS
DDDL 7.0,
VEPS, DRS
DDDL 7.0,
0
DRS, VEPS
VEPS, DRS
Power
DDDL 7.0,
0
DRS, VEPS
0 DRS, VEPS