DDEC VI ELECTRONIC CONTROLS APPLICATION AND INSTALLATION
Main Power Shutdown
The main power supply shutdown schematic shows the DDC approved method for main power
switch implementation. See Figure 3-12.
Figure 3-12
Main Power Supply Shutdown
NOTE:
Switches must remain closed for 30 seconds after ignition is off for the MCM and CPC to
write non-volatile data.
NOTE:
It is recommended that both the positive (+) and negative (-) battery leads be
disconnected.
3-67
All information subject to change without notice. (Rev. 01/07)
7SA827 0701 Copyright © 2007 DETROIT DIESEL CORPORATION