Optimized Idle Hood Tilt Switch; Installation; Programming Requirements And Flexibility - Detroit Diesel DDEC VI Application And Installation

INPUTS AND OUTPUTS
4.1.15

OPTIMIZED IDLE HOOD TILT SWITCH

The Hood Tilt Switch digital input indicates when the hood is opened or closed for Optimized
Idle operation.
The Hood Tilt Switch is a normally open switch and is required for Optimized Idle.

Installation

The Hood Tilt Switch is wired to the CPC on pin 4/18.

Programming Requirements and Flexibility

The options for this digital input are listed in Table 4-14.
Parameter
Parameter
Group
13 4 18 DI Selection
* Not supported in NAFTA
Table 4-14 Hood Tilt Switch Programming Options
4-16
Options
0 = Disable
1 — Enable Engine Door Bus*
2 — Enable Engine Hood
3 — AGS2 PTO Feedback
4 — RPM Freeze
5 — Engine Brake Disable
6 — Fast Engine Heat Up Switch
All information subject to change without notice. (Rev. 01/07)
7SA827 0701 Copyright © 2007 DETROIT DIESEL CORPORATION
Default Access
VEPS,
0 = Disable
DRS