Detroit Diesel DDEC VI Application And Installation page 207

4.3.21 VEHICLE POWER SHUTDOWN
This digital output actuates a relay that shuts down the rest of the electrical power to the vehicle
when an idle shutdown or engine protection shutdown occurs.
Installation
The Vehicle Power Shutdown is wired to pin 4/10 of the CPC. This is a high side digital output.
Programming Requirements and Flexibility
The options for this digital output are listed in Table 4-45.
Parameter
Parameter
Group
4 10 DO
35
Selection
4 10 DO Fault
35
Detection
Table 4-45 Vehicle Power Shutdown Programming Options
All information subject to change without notice. (Rev. 01/07)
7SA827 0701 Copyright © 2007 DETROIT DIESEL CORPORATION
DDEC VI ELECTRONIC CONTROLS APPLICATION AND INSTALLATION
Setting
0 — Disable
3 — Vehicle Power
3 — Vehicle Power
Shutdown
Shutdown/Ignition Relay
0 — Disabled
—
1 — Enabled
Options Default
0 — Disable
0 — Disable
Access
VEPS or
DRS
VEPS or
DRS
4-47