Connectors - Detroit Diesel DDEC VI Application And Installation

HARDWARE AND WIRING
3.2.6

CONNECTORS

There are three 18–pin connectors and one 21–pin connector to the CPC. The OEM is responsible
for the four connectors at the CPC, the 21–pin connector at the MCM, the 31–pin MCM pigtail
connector and the 10–pin DPF connector.
NOTE:
The CPC connectors are not water tight and cannot be subject to water spray.
The part numbers for the CPC connectors, the 21–pin connector at the MCM, the 31–pin MCM
pigtail connector and the 10–pin DPF connector are listed in the following tables.
Part
CPC - 18 Pin Connector - B Key
CPC - socket 0.5-1.0mm wire (single)
CPC - socket 1.0-2.5mm wire (single)
Table 3-82 Connector #1, 18–pin Connector, B Key
Part
CPC - 18 Pin Connector - A Key
CPC - socket 0.5-1.0mm wire (single)
CPC - socket 1.0-2.5mm wire (single)
Table 3-83 Connector #2, 18–pin Connector, A Key
Part
CPC - 21 Pin Connector - A Key
CPC - socket 0.5-1.0mm wire (single)
CPC - socket 1.0-2.5mm wire (single)
Table 3-84 CPC Connector #3, 21–pin Connector, Key A
Part
CPC - 18 Pin Connector - C Key
CPC - socket 0.5-1.0mm wire (single)
CPC - socket 1.0-2.5mm wire (single)
Table 3-85 CPC Connector #4, 18–pin Connector, Key C
3-70
DDC Part Number
018 545 67 26
013 545 76 26
013 545 78 26
DDC Part Number
013 545 64 26
013 545 76 26
013 545 78 26
DDC Part Number
013 545 65 26
013 545 76 26
013 545 78 26
DDC Part Number
018 545 68 26
013 545 76 26
013 545 78 26
All information subject to change without notice. (Rev. 01/07)
7SA827 0701 Copyright © 2007 DETROIT DIESEL CORPORATION