Connector Brackets; Figure 3-2 Series 60 Engine 120-Pin Connector And 21-Pin Connector Tie-Wrapped To - Detroit Diesel DDEC VI Application And Installation

HARDWARE AND WIRING

Connector Brackets

The harnesses on MCM must be bracketed and held secure. The bracket design will change for
different engines as the routing is different. The 120–pin connector and the 21-pin connector
must be tie-wrapped to the brackets as shown in the following drawing for the Series 60 engine
(see Figure 3-2).
Figure 3-2 Series 60 Engine 120–pin Connector and 21–pin Connector
Tie-wrapped to Brackets
3-16
All information subject to change without notice. (Rev. 01/07)
7SA827 0701 Copyright © 2007 DETROIT DIESEL CORPORATION