Clothing; Electric Tools - Detroit Diesel DDEC VI Application And Installation

After installation of the engine is complete:
To avoid injury from rotating belts and fans, do not remove
and discard safety guards.
□ Reinstall all safety devices, guards or shields
□ Check to be sure that all tools and equipment used to install the engine are removed from
the engine
2.5

CLOTHING

Wear work clothing that fits and is in good repair. Work shoes must be sturdy and rough-soled.
Bare feet, sandals or sneakers are not acceptable foot wear when installing an engine.
To avoid injury when working near or on an operating engine,
remove loose items of clothing and jewelry. Tie back or
contain long hair that could be caught in any moving part
causing injury.
2.6

ELECTRIC TOOLS

Improper use of electrical equipment can cause severe injury.
To avoid injury from electrical shock, follow OEM furnished
operating instructions prior to usage.
Check power tools before using.
All information subject to change without notice. (Rev. 01/07)
7SA827 0701 Copyright © 2007 DETROIT DIESEL CORPORATION
DDEC VI ELECTRONIC CONTROLS APPLICATION AND INSTALLATION
PERSONAL INJURY
PERSONAL INJURY
ELECTRICAL SHOCK
2-3