Detroit Diesel DDEC VI Application And Installation page 348

FEATURES
Cab PTO – Cruise Switch PTO
The Cruise Control switches are used to activate and control the Cruise Switch PTO (Cab PTO)
option. See Figure 5-33
NOTE:
Cab throttle and remote throttle can be overridden with the accelerator pedal unless
PTO Throttle Override Enable is enabled.
Figure 5-33 Cab PTO Mode
The Cruise On/Off switch must be turned ON and the park brake must be engaged (if configured).
If Cruise Switch PTO is inactive and the Cruise Switch PTO conditions are met, pressing and
releasing the Resume/Accel Switch will activate Cruise Switch PTO at the resume PTO speed
(Resume Accel Switch PTO Set Speed). Pressing and releasing the Set/Coast Switch will activate
Cruise Switch PTO at the set PTO speed (Set Coast Switch PTO Set Speed). The Resume PTO
Speed and the Set PTO Speed cannot be greater than the PTO maximum speed (Max PTO Spd
Resume Accel Sw) or lower than the PTO minimum speed (Min PTO Spd Set Coast Sw).
5-136
All information subject to change without notice. (Rev. 01/07)
7SA827 0701 Copyright © 2007 DETROIT DIESEL CORPORATION