Detroit Diesel DDEC VI Application And Installation page 230

FEATURES
In the applications where SEO is a momentary push-button, the button shall have to be pressed
and held in the ON position for an uninterrupted period of three seconds in order to activate the
feature. The feature can be deactivated after the SEO push-button is first released (off) for three
seconds and then held in the on position for another three seconds.
Programming Requirements & Flexibility
The flashing fault code parameters are listed in Table 5-9.
Parameter
Parameter
Group
Fault Code
35 Flashing
Enable
1 15 DI
13
Selection
* Not available in NAFTA
Table 5-9 Flashing Fault Code Parameters
5-18
Description Options
Enables /
Disables the 0 – Disabled
1 – Enabled
fault code
flashing feature.
0 – Disabled
1 – Stop Engine Override
Digital Input
Switch / Diagnostic Request
function for
Switch
Diagnostic
2 – CC Cancel*
Request feature
3 – Diagnostic Request
Switch
7SA827 0701 Copyright © 2007 DETROIT DIESEL CORPORATION
Default
1 – Enabled
1 – Stop Engine
Override Switch
/ Diagnostic
Request Switch
All information subject to change without notice. (Rev. 01/07)
Access
VEPS,
DRS
VEPS,
DRS